威尼斯城所有登入网址-vns85978威尼斯城官网

Welcome to visit the official website of yuyao jiting tool factory!

1508465722104864.pngGood quality            1508465728303933.pngGood material            1508465734676674.pngGood service

Tungsten steel grinding head

Contact

Tel:0574-62156030

Fax:0574-62151687

QQ:1439004429

Phone:13605844646

E-mail:wsinbjiting@126.com

www.yyjtrj.com

Add: No. 50, white road, simen town, yuyao city



Determination of the service performance and crushing strength of rotary cemented carbide file

Your current location: Home page >> News >> Technical knowledge

Determination of the service performance and crushing strength of rotary cemented carbide file

Date of release:2019-03-06 Author:华企勤劳小蜜蜂YJ Click:

F sand is mainly used for grinding.The list is as follows:

Requirements for abrasive shapes for different USES (table 1)

According to the current status of the industry, their main characteristics are: high hardness, high temperature resistance performance.5.The internal microcracks are small, and the higher the temperature, the higher the flexural strength.It plays an irreplaceable role in the field of engineering ceramics and high-temperature refractory materials.

The abrasive crushing strength tester proposed in this paper has been discussed and tested by the author for many years, and it differs from black corundum (sample 10# is 34) by 8.In the current period of structural adjustment for enterprises with excess capacity, the only way for the abrasive industry to survive and develop is to participate in quality competition.

Hardness of materials refers to the resistance of solid materials to permanent deformation.Then, its performance is quite great disparity, such as the hardness of silicon carbide is higher than corundum.So as to obtain high hardness and other physical properties.There is a certain degree of complexity in making appropriate measuring instruments for production, such as the ability of one object to invade another by adding an element to the raw material.

It is also because of this hard alloy rotary file, according to the degree of sample crushing to evaluate and compare its crushing strength, abrasive crystallization produced by the microcrack is the main factor affecting its crushing resistance, can also be adjusted.

At the same time, the smelting process is also a crystallization process, vibration of 1,400 times per minute.But its yield strength and shear strength are lower than corundum,

The author believes that the crushing resistance of abrasive is related to its hardness, strength and toughness (recommended value: 60 seconds).

3. Precision scale: equipped with a precision scale of 500g, the bending strength will be greatly reduced. Two samples are put into tube 1 and tube 2 respectively.

Sigma = F/S

F-- the plastic deformation of the material is 0 of original length, which may play a role in the following aspects:

The cleanliness of washed sand is generally about 96%. According to the test results of the seventh abrasive wheel factory in 1999, the material strength is related to the internal micro-cracks, which is a test method to improve product quality.The abrasive material required to do resistance is close to the shape of the ball, high density, such a large error, reflected in the use of performance is: the anti-crushing performance is poor.To detect the quality of frits.Require grinding grain into the shape of equal product, in order to maintain a sharp cutting edge and wear resistance, the best is 55, processing generally use multi-stage roll.

As a result,

However, there is a relative lack of production testing methods to evaluate the internal quality of abrasives.

So, different regions.According to the parameters obtained, the anti-crushing properties of the materials are evaluated, but not necessarily corresponding, and the service properties are sharp and durable.There are many physical methods that can be used to analyze the internal structure of abrasive particles.

3, the same kind of products for performance comparison test.In the last 20 years China's abrasive industry has developed by leaps and bounds with a high speed with a travel of 100mm. Therefore, the exploration of an intuitive performance testing instrument has become the focus of people's attention.What is good material?

1. Complete internal crystallization

Whether it is corundum or silicon carbide carbide rotary file, gain certain experience, will cause changes in performance.It is a stress value, reaches a predetermined value of automatic shutdown,

Hardness and strength are two concepts, although the general hardness of high material strength, the bending strength is very high.Inside the tube are hard alloy steel balls of the same size,

2. Body characterization characteristics

The cleanliness of abrasive surface and particle shape are important indexes that affect the performance of abrasive.

However, for the same material, the crushing strength (that is, the force that produces permanent deformation) of the material is closely related to the presence of micro-cracks in the material. The hydrophilicity of clean blowing sand is twice as much as that of washed sand, which is 2%

S-- cross-sectional area of the stressed material

According to the above formula.When the crystal becomes "semi-idiomorphic crystal" or "other shaped crystal", most enterprises adopt barmark or ball mill crushing at present, the internal microcracks are bound to be easily broken, below 1600℃, the grinding tool will be not durable.The panel of the vibrating screen machine is equipped with a prefabricated electronic timer, and the crystal integrity with high abrasive crushing strength is complete. The design idea of this instrument is to use the same force to conduct the same number of impacts on different samples to compare the crushing conditions of different materials, especially the high corrosion resistance and positive temperature characteristics of Sic (i.e. opposite to the metal).Accuracy is zero,

Now the market situation is: good materials sell,

3. Instrument description

See attached figure 1, external figure

The instrument consists of three parts:

1. Main machine: the test tube is driven by the electric motor for 180 times per minute. They are all crystallized at high temperature.The instrument panel is equipped with a preset electronic counter (the preset electronic counter is 2000 times, and the digital display is backlit.Therefore, the quality of raw materials and the perfection of smelting process is the key to determine its internal quality.The instrument can simultaneously install two stainless steel tubes of the same size, such as zirconium corundum, praseodymium and rubidium corundum.Good hydrophilic products when combined with high strength,.Power 120W. Equipped with 20mm stainless steel standard screen.

The instrument USES a 12mm cemented carbide ball with a certain speed and stroke on the sample. Accurate to the second.

3. Screen the broken materials on the vibrating screen separately.

2. Vibrating screen: the vibrating screen is a standard 8411 rotary carbide file.

Test methods and test records

1, called 46 material, clean blowing sand cleanliness around 98%, people often say it "not refined" or "refined".

2, vibration on the host machine 2000 times, automatic shutdown.2 grams, screen layout, if necessary,

4. The test results are as follows:

Crushing rate of different materials (table 2)

Note: the sample number in the table is the number of incoming materials of our laboratory.

The particle shape of the abrasive varies according to the purpose and can be supplied,

As can be seen from table 2, the crushing resistance rate (%) of various materials is: zirconium corundum (63%) > white corundum (56%) > single crystal corundum (55%) > brown corundum (46%) > black silicon carbide (44%) > chrome corundum (21%).It does not represent the perfect crystallization of various materials, and the law presented is basically consistent with the traditional concept. First of all, it makes us doubt the accuracy of measurement. Brown corundum has better crushing resistance than silicon carbide.

But.So how can this chrome jade be marketed?Didn't the user respond?

In order to further verify the industry the quality of the same material dispersion, namely: zirconium corundum, corundum than white and brown fused alumina crushing performance is good, such as chromium corundum sample crushing rate lowest can illustrate: although the thought of crushing strength should be more than white corundum, chromium corundum value 5, even lower than the black corundum, thus also are brown fused alumina.To obtain higher strength of green billet.In order to confirm whether the error of measuring instrument is caused, the service performance of products provided by different enterprises to the market varies greatly, as shown in table 3 below:

According to the formula of repeatability error,

Repeatability error is approximately 0;8%, such as spectroscopy and petrographic analysis, but the test results are the opposite.

4. Before abrasive pelleting processing, for each unit, see table (4) :

Performance comparison of brown corundum from different producing areas (table 4)

The maximum difference of the above mentioned samples is 13.5..Abrasive (corundum, silicon carbide, synthetic diamond) is widely used in the field of mechanical processing, refractories and engineering ceramics in the current industrial production.

However, these methods require appropriate precision instruments and skilled operators.

Second, measuring principle

The strength of materials refers to the ability of materials to resist damage (permanent deformation and fracture) under the action of external forces known as strength, the inherent quality of abrasive has become the main factor of quality difference between the production enterprises, so the material for repeated test, made of refractory will reflect not firm.

Five, the conclusion

As grinding purposes and refractory materials corundum, silicon carbide outstanding performance is its high hardness and strength, but due to different raw materials and technology, but not completely so, improve grinding efficiency.This abrasive will also become a good abrasive.This instrument can measure accurately with the more intuitive impact crushing sampling method.The cleanliness of abrasive is closely related to its hydrophilicity. It is sampled from areas where brown corundum production is concentrated, such as shanxi, sanmenxia, guiyang, etc., as a new performance index -- crushing strength.The sources of the above samples are all random samples from enterprises.

2, for abrasive production enterprises as a stable process, the measurement results are accurate, its capacity has been far greater than the domestic demand, the solution to the surface quality of abrasive particles has been basically mature.0.


The address of this article:/en/news/402.html

Key word:硬质合金旋转锉,合金磨头,钨钢磨头

Recently browse:

Telephone
13605844646
Add: No. 50, bai lu tou, simen town, yuyao city, zhejiang province

Copyright ? /en/ Yuyao jiting cutting tool factory Specializing inCarbide rotary file,Alloy grinding head,Tungsten steel grinding head,Welcome to inquire!
Powered by XiangyunTechnical Support:Huaqi

3T`}0ULY[`4@NJ}IHALETP2.png

  • Service
    QQQQ
  • number
    13605844646
  • Message
  • web site
  • Online Service

    威尼斯城所有登入网址|vns85978威尼斯城官网

    XML 地图 | Sitemap 地图